High-Speed DSL Service
Provided by Affinity4
|
|
Support the American Center for Law and Justice without impacting your budget!
You give back to the ACLJ every time you surf the Internet.
|
|
|
|
|
|
How to Set Up High-Speed DSL Service |
1. Installing Phone Filters:
You must install the included Phone Filters on every device (phones, fax machines, satalite receivers etc.) that is connected to the same line as your new DSL. |
|
2. Installing DSL Modem:
- Plug the included Phone Line Splitter in to your Wall Jack. If you are going to be using another device (phone, fax machine, satalite receiver etc.) plug-in one of your Phone Line Filters into the Splitter and then plug your phone into the filter. On the other side of the splitter hook up your DSL modem directly with the supplied phone cable. Be sure to plug it into the LINE or DSL port on the back of your modem.
- Make sure your computer is turned off.
- Take the supplied Ethernet cable and plug it into the LAN or ETHERNET port on the back of the modem. Plug the other end of the cable into the Ethernet port on the computer.
- Plug the supplied power cord into the modem and then into an available plug.
- Turn on the computer.
|
|
|
|
|